1" High-Intensity Retro-Reflective (Conspicuity) Tape - available in 8 colors.  Reflexite's V92 & V97 Daybright (specs) reflective tapes utilize internal cube-corner microprisms to provide a brilliant reflection.  It provides exceptional brightness even when viewed at angles low to its surface.  Daybright has a distinctive triangular weld pattern and is tough, yet flexible enough to wrap around bicycle tubing.  Thickness is 5-mils for standard colors and 18-mils for fluorescent.  It is highly adhesive, weatherproof, carries a 3-year warranty, and is also fire resistant - meeting NFPA standards for fire resistance (500ºF for 5 minutes without melting, dripping, or igniting),  Its brightness, depending on color, ranges from 2.7 to 4.4 times brighter than typical engineering grade material.  Daybright has a high-tack adhesive with peel-off backing and is ideal for reflective striping on emergency vehicles, respirator tanks, motorcycles, bicycles, helmets, gates and bollards.  It even works with infra-red range finders.  The order of decreasing brightness is silver, gold, fluor. yellow, fluor. orange, orange, red, green, and blue.  Tape is slit to metric measurements that are slightly less than full inches.  Tape is sold in 15-foot lengths.  If continuos rolls are desired, please indicate so in the "comment box" when checking out.  50-yd rolls (150 feet) are also available below.  Cobb County, GA requires use of 1" orange on certain fire hydrants.